Inquiry Form

Close

Close

PRODUCTS

MA390/MA391

Slimline Cartridge Seal

  • Cartridge
  • Balanced
  • Independent of direction of rotation
  • Stationary multiple springs
  • Springs and pin located on the atmospheric side

Product specification example

Standards and approvals

EN 12756
ISO 3096

Materials

Seal face (MA290, MA390): High density
carbon graphite
Seal face (MA291, MA391): Silicon carbide (Q1)
Seat (MA290/291, MA390/391): Silicon carbide (Q1)
Metal parts: CrNiMo steel 316 (G)
Secondary seals: FKM (V)

Operating range

MA290 / MA390:
Pressure: p = … 20 bar (290 PSI)
Temperature: t = -20 °C …160 °C (-4 °F … 320 °F) (oil), 0 °C … 60 °C (32 °F … 140 °F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 0.5 Pa·s
Solids content: 0.3wt. %

MA291 / MA391:
Pressure: p = … 16 bar (232 PSI)
Temperature: t = -20 °C …160 °C (-4 °F … 320 °F)(oil), 0 °C … 60 °C (32 °F … 140 °F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 3 Pa·s
Solids content: 10 wt.%

Product variants

MA390 (MA391)
Axially downsized type of MA290 (MA291).

Applicable ranges shown in the product introduction are limit values for each standard material.
Applicable ranges, performance data and figures can serve only as a guide for selection and therefore in actual use there will be some cases where general specifications cannot be applied due to unknown factors or constraints.
Please check the applicability before use.
The contents are subject to change without notice for improvement.

Contact

This website uses cookies to improve your online experience. By continuing to use this website, we will assume that you are agreeing to our use of cookies. For more information about cookies, please visit our " Use of cookies" at Privacy Policy.