Inquiry Form

Close

Close

PRODUCTS

Y8K

Bellows Seal for Process Chemical

Superb corrosion resistance makes this seal applicable to any chemical liquids.
This product ensures ideal corrosion resistance. PTFE is used for all the rotating parts that come into contact with liquids. Carbon and PTFE containing fillers are used for the sliding materials.
Corrosion-resistant metallic materials are used for parts that do not come into direct contact with fluids. This product can handle any chemical liquids including reducing agents, strong acid/alkaline liquids, salts, and concentrated acids.

Feature

PTFE bellows type seal for low pressures (used as an outside seal)

* The Y8K is an outside seal and does not meet ISO standards.

 A quenching device is required for the flange.

Product specification example

Operating range

Pressure: 4.5 bar (65 PSI)
Temperature: −10 ºC to 120 ºC (14 ⁰F to 248 ⁰F)
Sliding velocity: 15 m/s (49 ft/s)
Viscosity: 0.1 Pa・s
Solids content: 0.1wt% max.

Seal liquids

Highly corrosive fluids

Applicable ranges shown in the product introduction are limit values for each standard material.
Applicable ranges, performance data and figures can serve only as a guide for selection and therefore in actual use there will be some cases where general specifications cannot be applied due to unknown factors or constraints.
Please check the applicability before use.
The contents are subject to change without notice for improvement.

Contact

This website uses cookies to improve your online experience. By continuing to use this website, we will assume that you are agreeing to our use of cookies. For more information about cookies, please visit our " Use of cookies" at Privacy Policy.