PRODUCTS
GlideX-MMS (Marine Motor Seal)
Textured Seals for Propulsion Units of Small Boats
・For propulsion units of small boats.
・Extremely low oil leakage and prevention of water ingress into a motor.
・Reduced wear due to non-contact between the sliding surfaces.
・Supports shaft rotation in both directions.
Feature
This seal is a mechanical seal that realizes both extremely low oil leakage and prevention of flooding into a motor by applying surface texturing to the sliding surface.
It is applicable to equipment such as propeller shaft seals which are required both directions of shaft rotation and sealing both liquids, oil and seawater, inside and outside of a machine.
It provides high sealing performance against two fluids, preventing oil leakage from leaking into the sea and seawater from entering the interior of a machine.
Non-contact sealing during rotation reduces wear on the sliding surfaces.
Product specification example
| Sealed Fluid | Seawater, oil |
|---|---|
| Maximum Rotational Speed | Max. 5.0m/s |
| Shaft diameter | φ14mm～φ70mm |
| Oil viscosity | ～300mPa・s |
| Pressure range | 0.0MPaG～0.2MPaG |
| Temperature range | 10℃～70℃ |
Note: Above shows typical conditions, please contact us with your specific requirements.
