A lot of reference of use on sink rolls delivered to steel making industries.
Designed to offer all the functions required of sink roll seals, this product has been made possible by Eagle Industry’s expertise in the characteristics of sink rolls. The seal takes full advantage of the rubber’s characteristics. The diaphragm made from rubber absorbs up to several millimeters of eccentricity and shaft elongation/displacement.
The silicon carbide sliding material, employed ahead of our competitors, helps extend the service life of the mechanical seal and significantly reduces the need for maintenance. Various sliding materials can be selected for different purposes.
・Only small number of components for easy handling
・A stationary outside seal employing a rubber diaphragm. Achieves superb followability and corrosion resistance
・Eccentricity and shaft elongation/displacement absorbed by the universal rubber diaphragm
・CSM used as the standard rubber material (characterized by superb corrosion resistance)
※ CSM：Chlorosulfonated polyethylene
Product specification example
Pressure:0.5 bar (7 PSI)
Sliding velocity: 5 m/s (16 ft/s) [EA130], 4 m/s (13 ft/s) [EH300]
Temperature: 70 ºC (158 ⁰F)
Roll neck of sink rolls: sodium orthosilicate, sodium hydroxide, chromic acid, sulfuric acid, sodium hypochlorite, plating liquids, etc.
Sink rolls, etc.
※Applicable ranges shown in the product introduction are limit values for each standard material.
Applicable ranges, performance data and figures can serve only as a guide for selection and therefore in actual use there will be some cases where general specifications cannot be applied due to unknown factors or constraints. Please check the applicability before use.
The contents are subject to change without notice for improvement.