• なし

Standard Cartridge Seals
MA290 / MA291



・Independent of direction of rotation
・Stationary multiple springs
・Springs and pin located on the atmospheric side

Product specification example

<Standards and approvals>
EN 12756
ISO 3096


Seal face (MA290, MA390): High density carbon graphite
Seal face (MA291, MA391): Silicon carbide(Q1)
Seat (MA290/291, MA390/391): Silicon carbide (Q1)
Metal parts: CrNiMo steel 316(G)
Secondary seals: FKM (V)


<Operating range>
MA290 / MA390:
Pressure: p = … 20 bar (290 PSI)
Temperature: t = -20 °C …160 °C (-4 °F ... 320 °F) (oil), 0 °C ... 60 °C (32 °F ... 140 °F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 0.5 Pa·s
Solids content: 0.3wt. %
MA291 / MA391:
Pressure: p = … 16 bar (232 PSI)
Temperature: t = -20 °C …160 °C (-4 °F ... 320 °F)(oil), 0 °C ... 60 °C (32 °F ... 140 °F) (water)
Sliding velocity: vg = max. 20 m/s (66 ft/s)
Viscosity: 3 Pa·s
Solids content: 10wt. %


<Recommended applications>
Water and waste water technology
Chemical industry
Petrochemical industry
Pharmaceutical industry
Food and beverage industry
Universally applicable
Centrifugal pumps
Eccentric screw pumps
Process pumps

※Applicable ranges shown in the product introduction are limit values for each standard material.
Applicable ranges, performance data and figures can serve only as a guide for selection and therefore in actual use there will be some cases where general specifications cannot be applied due to unknown factors or constraints. Please check the applicability before use.
The contents are subject to change without notice for improvement.

Product Catalog Download

Product name:Standard Cartridge Seals
MA290 / MA291

Related product

About Cookies
on this site :
This website uses cookies to improve your online experience. By continuing to use this website, we will assume that you are agreeing to our use of cookies. For more information about cookies, please visit our "Use of cookies" at Privacy Policy.