Products

Products

なし+

  • なし

Pusher seals
H3B

Contact

Print

Excellent torque transmission due to clutch
drive between seal head and drive collar.

Feature

・Single Seal
・Balanced
・Independent of direction of rotation

Product specification example

<Standards and approvals>
ISO 3096

 

<Materials>
Seal face : Silicon carbide (Q1)

Seat: Tungsten carbide (U7)
Secondary seals: FKM (V)
Metal parts: CrNiMo steel (G)

 

<Operating range>
Pressure: p = 16 bar (232 PSI)
Temperature: t = -20 °C … +160 °C (-4 °F … 320 °F)
Sliding velocity: vg = 20 m/s (66 ft/s)
Viscosity: … 300 Pa·s
Solids content: … 7 wt.%

 

<Recommended applications>
Process industry
Oil and gas industry
High viscous media (tar, heavy oils)
Process pumps

 

※Applicable ranges shown in the product introduction are limit values for each standard material.
Applicable ranges, performance data and figures can serve only as a guide for selection and therefore in actual use there will be some cases where general specifications cannot be applied due to unknown factors or constraints. Please check the applicability before use.
The contents are subject to change without notice for improvement.

Product Catalog Download

Product name:Pusher seals
H3B

Related product

About Cookies
on this site :
This website uses cookies to improve your online experience. By continuing to use this website, we will assume that you are agreeing to our use of cookies. For more information about cookies, please visit our "Use of cookies" at Privacy Policy.